Hot Specials

Synergy is a new generation penetrating liquid that consolidates, hardens and binds the surface of porous and friable masonry materials. It also possesses premium penetrating sealer properties to ensure maximum protection of the stone from permanent staining and has been scientifically developed and laboratory tested against Australian Standards. Developed especially for use around all swimming pools to assist in prevention of salt attack and is warranted for a period of 2 years. Is suitable for most porous internal and external stone and masonry surfaces and will protect against grease, grime, mould and mildew. Dip sealing the copers with the first coat is recommended and approximately 10 square metres per litre, per coat. 2-3 coats are required depending on the porosity of the stone. More porous masonry requires more coats for adequate protection properties.

Enviroseal Plus is a water based penetrating sealer designed for use on most porous masonry surfaces such as concrete or clay pavers, sandstone, limestone, travertine or re constituted products. Has been developed to avoid the strong odours associated with solvent based sealers. Some darkening of the treated surface may occur with the use of this product. Can also be applied to a damp paver or used as a pre-seal prior to grouting. Apply a minimum of 2 thin coats. Generally a Coverage approx. 5 – 15 m2 per litre per coat and resealing required every 1 – 2 years.

Consolidator Plus is a combination consolidating and penetrating sealer specially formulated for stain and salt protection around swimming pools and soft masonry surfaces. A premium natural look penetrating sealer suitable for internal, external, domestic and commercial surfaces and will help prevent permanent staining from most common household spills and will not change the slip factor.Not suitable for bluestone and may slightly change the colour of the surface. Coverage is approx. 5 – 15 m2 per litre per coat and a minimum of 2 thin coats is needed. The number of coats and coverage also depends on the porosity of the surface. Dip seal copping tiles with first coat.

HI-LITE is a premium semi penetrating sealer designed to darken and highlight the natural beauty of the stone without making the surface too slippery. HI-LITE is suitable for internal, external, domestic and commercial surfaces. Suitable for honed and polished block walling. May not be suitable for honed or polished natural stone and wet cast paving. Generally 2 even coats should be applied. Approx 10 to 12 square metres per litre per coat, pending on the porosity of the surface.